>

Light Master

Light Master

Light Master Pre-Bonded

Pre-mixed lightening powder with bonder inside, up to 8 levels of lift.
Details

Everything you love about Light Master, now with the power of bonder inside, no additive needed! Protect bonds to keep fibers strong while lifting up to 8 levels.

• Technology allowing up to 8 levels of lift.

• Pre-mixed with Bonder so no additives needed.

• Perfect for all lightening techniques.

• Can be used with up to 30 volume developers for on scalp application.

• No bonding additive needed, same level of lift, same use with clay & oil additives, adjustable techniques.

How To Use

Mixing Ratio & Application:

  • For on-scalp applications, a 1:2 mixing ratio (with 10, 20, or 30 volume maximum) must be used.
  • For off-scalp applications, you may use a 1:1, 1:1.5, or a 1:2 mixing ratio (for 1:1 or 1:1.5, use with 10, 20, or 30 volume maximum, and for 1:2 use 10, 20, or 30 volume maximum) depending on the consistency you prefer for application.

Timing:

Up To 50 minutes room temperature.

*Always follow manufacturer's packaged instructions.

Ingredients

POTASSIUM PERSULFATE • SODIUM SILICATE • SODIUM STEARATE • MAGNESIUM CARBONATE HYDROXIDE • AMMONIUM PERSULFATE • CITRIC ACID • SODIUM METASILICATE • CYAMOPSIS TETRAGONOLOBA GUM / GUAR GUM • PARAFFINUM LIQUIDUM / MINERAL OIL / HUILE MINERALE • DISODIUM EDTA • SODIUM LAURYL SULFATE • GLYCINE • CI 77007 / ULTRAMARINES • AQUA / WATER / EAU

Frequently Asked Questions

How Does Light Master Pre-Bonded Compare To Light Master?

Light Master Pre-Bonded will give you the same lifting performance as Light Master with the added benefit of having a bonding additive built-in.

Will I Get The Same Lift As I Do With Light Master?

You will achieve up to 8 levels of lift with Light Master Pre-Bonded which is the current lifting power of Light Master.

Can I Use A Bonding Additive With Light Master Pre-Bonded?

We do not recommend adding an additional bonding additive to Light Master Pre-Bonded as it could affect the lifting action, and could yield undesirable results.

Can Light Master Pre-Bonded Be Used For Both On-Scalp And Off-Scalp Applications?

Light Master Pre-Bonded can be used for both on-scalp and off-scalp applications, however be sure to respect the mixing ratios for each. For on-scalp applications, a 1:2 mixing ratio (with 10, 20, or 30 volume maximum) must be used. For off-scalp applications, you may use a 1:1, 1:1.5, or a 1:2 mixing ratio (for 1:1 or 1:1.5, use with 10, 20, or 30 volume maximum, and for 1:2 use 10, 20, or 30 volume maximum) depending on the consistency you prefer for application.